Daily maintenance of cast iron platform

1. In order to prevent deformation of the cast iron flat plate, four steel wire ropes of the same length should be used to simultaneously hang the four lifting holes on the cast iron flat plate during lifting, and the cast iron flat plate should be smoothly lifted onto the transport vehicle.

2. Place and level the support points of the cast iron flat plate, ensuring that each support point is evenly stressed and the entire cast iron flat plate is stable.

3. When installing the cast iron flat plate, the various support points of the cast iron flat plate should be padded and compacted with adjusting shims, and the cast iron flat plate should be adjusted to qualified accuracy by professional technicians.

4. When using a cast iron flat plate, the workpiece should be handled gently and rough workpieces should not be moved on the cast iron flat plate to avoid damage such as bumps and scratches on the working surface of the cast iron flat plate.

5. In order to prevent the overall deformation of the cast iron flat plate, the workpiece should be removed from the cast iron flat plate after use to avoid long-term heavy pressure on the cast iron flat plate caused by the workpiece.

6. When the cast iron flat plate is not in use, the working surface should be cleaned in a timely manner, then coated with a layer of anti rust oil, and covered with anti rust paper. The cast iron flat plate should be covered with the outer packaging of the cast iron flat plate to prevent damage to the working surface of the cast iron flat plate caused by carelessness.

7. Cast iron plates should be installed in a ventilated and dry environment, away from heat sources, corrosive gases, and corrosive liquids.

8. Cast iron flat plates are subject to regular weekly inspections according to national standards, and the inspection cycle can be 6-12 months depending on the specific situation. Packaging: There are two forms of packaging: iron plate packaging and wooden packaging. The platform table is sealed with plastic film, which is suitable for inland transportation of flat plates and has good measures to protect the flat plates from moisture, shock, rust, and rough loading and unloading to ensure safe delivery to the site.

Transportation of cast iron: Transportation is an important part of ensuring that the flat plate does not deform, so when transporting the flat plate, it is necessary to ensure that it is not overloaded, overspeed, fatigued driving, or transported in adverse weather conditions.

Precautions for use: The tablet should be installed and debugged before use. Then, wipe the working surface of the tablet clean and use it after confirming that there are no problems. During use, be careful to avoid excessive collisions between the workpiece and the working surface of the tablet to prevent damage to the working surface of the tablet; The weight of the workpiece should not exceed the rated load of the flat plate, otherwise it may cause a decrease in work quality, damage the structure of the flat plate, and even cause deformation of the flat plate, making it unusable.